Hello, nice
this objective is a stabilized power supply valve, specifically designed for lovers of obbisti valvlole
as always you have to pay full attention since escaping from food to +400 vdc 100ma max.
this instrument is capable of providing four different tensions: 6.3vac 12.6vac 4A or 2A, for the filaments and can provide two different voltages, respectively, from 0 to-150V 1mA, utilis for the cathode or to bias the control grid of the valve, and 0 to 400V 100mA to make all experiments that you want.
in addition there are two measuring devices, a handheld multimeter and a voltmeter to the two scales
to decide which of the two scales show, you have to slide the toggle between the two knobs.
the other pivoting lever that can be displayed on the front of the power supply in the lower left is the lever that turns on the device while the last
lever that you can find is a lever that must be kept on standbay in mmod that the filaments become warm, when we move to withdraw the dc voltages desisderiamo
filaments are always on, so you can always withdraw 6.3ac, but first we must turn all the apparatus, of course
this objective is a stabilized power supply valve, specifically designed for lovers of obbisti valvlole
as always you have to pay full attention since escaping from food to +400 vdc 100ma max.
this instrument is capable of providing four different tensions: 6.3vac 12.6vac 4A or 2A, for the filaments and can provide two different voltages, respectively, from 0 to-150V 1mA, utilis for the cathode or to bias the control grid of the valve, and 0 to 400V 100mA to make all experiments that you want.
in addition there are two measuring devices, a handheld multimeter and a voltmeter to the two scales
to decide which of the two scales show, you have to slide the toggle between the two knobs.
the other pivoting lever that can be displayed on the front of the power supply in the lower left is the lever that turns on the device while the last
lever that you can find is a lever that must be kept on standbay in mmod that the filaments become warm, when we move to withdraw the dc voltages desisderiamo
filaments are always on, so you can always withdraw 6.3ac, but first we must turn all the apparatus, of course
I always recommend to pay attention eto avoid injury to yourself or you break the machine!!
0 comments:
Post a Comment